Skip to main content
Connect Agoda
Written by Evan Davies
Updated over a week ago

You will need to have your direct contract with Agoda for your property, please sign up with them and upload all your details and images etc.

Once the property is ready to connect please ask support to connect to Channex or you can do it yourself using their interface.

How to connect to Channex

For existing Agoda partners:

  1. 1.Go to YCS > Settings > Property Settings.

  2. 2.Click Optional Settings.

  3. 3.Tick or untick enable channel manager mode box to add or remove channel manager.

  4. 4.Select Channex from the drop-down box.

  5. 5.Click Save.

Create the Agoda Channel

Go to the channels tab and click on "Create"

Select Agoda as the channel

Title - Enter the name you would like here to describe this connection

Group: Choose the correct group of which property you need to connect.

Property: Choose the property you wish to connect from Channex

Hotel ID: This will be the Agoda Hotel ID

Test Connection - This button will check if we have access to that property in Agoda, if there is an error please check your property ID. You might need to ask Agoda support to check if Channex is connected.

Sometimes it will take an hour before the connection is live, if you only just switched then try again later


Click the mapping tab if the test button is a success, this will bring up mapping table.


Agoda mapping will always be multi occupancy. If you don't support that you can map the same occupancy to all the different occupancies.

Now you can map the room types from Channex to the Agoda Room types and also any rate plans.

Make sure all is mapped and nothing left unmapped.

Once you save the channel please activate it

Did this answer your question?